如进行低应变测试则将低应变传感器和低应变用测试电缆连接好，并插入前面板

如进行低应变测试则将低应变传感器和低应变用测试电缆连接好，并插入前面板上的4芯低应变接口后可开机运行检测程序。
特别注意：不能同时插入低应变前机和高应变前机，否则仪器可能不能正常工作！！

結果 (英文) 2:

As low strain test will be low strain and low strain sensor cable is connected with the test, and insert the front panel 4-pin low strain interfaces can be switched on after the test.
Special Note: You can not insert low strain and high strain before the machine before the machine, otherwise the instrument may not work properly! !

結果 (英文) 3:

For low strain testing, the low strain sensor and low strain test cable is connected well, and the test program can be run after the 4 core low strain interface is inserted into the front panel. Special note: can not be inserted at the same time before the low strain and high strain of the former machine, otherwise the instrument may not work properly!!