一般来说，实验过程中放电源激发的电磁波主要分布在40-200M频段范围

一般来说，实验过程中放电源激发的电磁波主要分布在40-200M频段范围内，处于这一频段的电磁波属于TEM波(横电磁波)[39][23]，它们在断路器内部是沿直线传播的，而传播速度可以认为就是光速，近似为3.0 x 108 m/s。两传感器的间距为3米，r=1.5米。

結果 (英文) 1:

In general, the experimental process put the power of electromagnetic waves excited mainly distributed in this band of electromagnetic waves in the frequency range of 40-200m belongs tem wave (transverse electromagnetic) [39] [23] along a straight line, they are inside the circuit breaker spread, propagation velocity can be considered is the speed of light, approximately 3.0 x 108 m / s. The two-sensor spacing of 3 m, r = 1.5 m.

結果 (英文) 2:

In general, the experimental process of discharge source excitation of the electromagnetic waves are mainly distributed in the 40-200M frequency range, in the band of the electromagnetic wave belongs to the TEM wave (transverse electromagnetic wave) [39][23], they are in the internal circuit breaker is propagated along the straight line, and propagation speed can be considered is the speed of light, approximately 3 x 108 m/s.Two sensors are spaced 3 metres, r=1.5 M.

結果 (英文) 3:

In General, motivated by power in the experiments within the main distribution in the 40-200M band of electromagnetic waves, electromagnetic waves belong to the TEM wave in this band (TEM) [39][23], which is along a straight line propagation within the circuit breaker, and propagation velocity is the speed of light can be considered approximately 3.0 x 108 m/s. Two sensors spaced 3 m, r=1.5 m.