从表1中的实验数据及计算结果可以看出，利用本论文提出的改进方法对局部放

从表1中的实验数据及计算结果可以看出，利用本论文提出的改进方法对局部放电源进行定位是切实可行的，定位的绝对误差较小，定位精度比TDOA有一定程度的提高，都可以满足定位的要求。

結果 (英文) 1:

As can be seen from Table 1, the experimental data and the calculated results, the improved method of use of this thesis to locate the partial discharge source is practicable, the smaller the absolute error of positioning, positioning accuracy than tdoa have improved to some extent, are to meet the requirements of positioning.

結果 (英文) 2:

From table 1 in the experimental data and the results show that, using the proposed method to the partial discharge source location is feasible, the small absolute error of positioning, positioning accuracy than TDOA were improved to a certain extent, can meet the requirement of positioning.

結果 (英文) 3:

From the experimental data and the results in table 1 can be seen, presented in this paper improved methods for partial discharge sources location is practical, positioned absolute error less than the TDOA positioning accuracy there has been some improvement, can meet the position requirements.