PCI9052内部有一个64字节的配置空间头标区和一个84字节的本地配

PCI9052内部有一个64字节的配置空间头标区和一个84字节的本地配置寄存器组，可由串行EEPROM对其进行配置。主机启动时首先检验串行EEPROM，如果安装了EEPROM且前48位不全为1，则用EEPROM中的值来配置PCI9052的寄存器，否则使用缺省值[5]。在本设计中EEPROM采用了Atmel公司的E2PROM-AT24C02a。

結果 (英文) 1:

PCI9052 has a 64-byte configuration space header area and a 84 bytes of local configuration registers may be made by the serial EEPROM to configure it. First when the host starts testing the serial EEPROM, incomplete if the EEPROM is installed and the first 48 bits is 1, the value in the EEPROM is used to configure the PCI9052 register, otherwise, use default values [5]. In this design, the EEPROM using Atmel's E2PROM-AT24C02a.

結果 (英文) 2:

PCI9052 local configuration inside a 64-byte configuration space header area and a 84-byte register groups can be configured serial EEPROM. First test starts when the host serial EEPROM, 1, then use the value in EEPROM to configure the PCI9052 registers, otherwise the default value [5] If you installed the EEPROM and the insufficiency of the former 48. In this design, EEPROM using Atmel's E2PROM-AT24C02a.

結果 (英文) 3:

PCI9052 internal configuration space the first 64 bytes of the subject area and a 84 byte local configuration register group, can be configured by the serial EEPROM. The host start when the first test serial EEPROM, if installed EEPROM and the first 48 bits are not all 1, with EEPROM values in the PCI9052 configuration register, or use the default value of [5]. In this design, EEPROM uses Atmel's E2PROM-AT24C02a.