号杆1、电杆编号应按设计规定进行标志。杆号牌大小为（高×宽）500mm

号杆
1、电杆编号应按设计规定进行标志。杆号牌大小为（高×宽）500mm×250mm，整体为白底、黑字、蓝框（框的宽度为3mm），制作时用预制的框架在电杆上喷白瓷漆，号牌应面向铁路侧；
2、编号：号杆应以中继段为单位，从光缆A端开始向B端依次编序杆号。杆号应标在面向铁路一侧，最低的一个字符应距地面2.5m;
3、最上边为业主G11的LOGO标志，尺寸为：200mm*200mm;
4、文字部分：
4.1第一行为杆号。杆号以中继段为单位，A端为起点，B端为终点。起始杆号为“P0001”；字体为4×8的Times New Roman,字符之间的间距为5mm;
4.2第二行为中继段的起点地名缩写。例如：Yangon的缩写为“YGN”；第三行为英文字母“TO”；最后一行为中继段终点地名缩写，例如：BAGO的缩写“BGO”；字体为4×5的Times New Roman,字符之间的间距为10mm;
4.3所有横排之间的间距均为10mm.
电杆编号事例：Yangon至Bago中继段架空光缆第1111根电杆，号杆为：

結果 (英文) 1:

Rod1, pole number shall be carried out according the design of signs. Plate size (height x width) 500mmx250mm, overall has a white background and black lettering, blue box (box has a width of 3mm), with precast when making sprayed white paint on the frame on the pole, the plates should be railway oriented;2, ID: Rod should relay marked units, from cable a side to the b side, followed by sequencing. Number shall be marked in rail-oriented side, minimum one character should be 2.5M from the ground;3, the top LOGO logo for owners of G11, dimensions: 200mm*200mm;4, text parts:4.1 the first number. To relay field is flat at bar, a port as a starting point, end b-end. Starting pole number as "P0001"; font-4x8 Times New Roman, spacing between characters is 5mm;4.2 second relay segment of place name abbreviations. For example: Yangon the abbreviation "YGN"; the third letter "TO" last action relay end point name abbreviation, for example: abbreviation for BAGO "BGO"; font-4x5 Times New Roman, spacing between characters is 10MM;4.3 for all horizontal spacing between 10MM.Pole number example: from Yangon to Bago hops aerial cable 1111th post, as follows:

結果 (英文) 2:

No. lever
1, poles numbered provisions should be designed logo. Pole plate size (height × width) 500mm × 250mm, overall for the white, black, blue frame (frame width is 3mm), the production of prefabricated frame sprayed with white enamel on the pole, should face plate Railway side;
2, NO: No bar should hop as a unit, from the beginning to the end of the cable A B-side sequence annotation pole number. Pole number shall be marked in the side facing the railway, should be a minimum of one character from the ground 2.5m;
3, the uppermost G11 owners of LOGO logo, size: 200mm * 200mm;
4, the text parts:
the first acts of 4.1 bar number. Pole number of hops to the unit, A-side as a starting point, B-side to the end. Starting pole number "P0001"; font for 4 × 8 in Times New Roman, spacing between characters is 5mm;
4.2 second starting place name abbreviation hop acts. For example: Yangon abbreviation for "YGN"; third acts the letters "TO"; the end of the last acts of hops abbreviation of names, such as: BAGO abbreviation "BGO"; font for 4 × 5 in Times New Roman, the character of the spacing between for 10mm;
all horizontal spacing between 4.3 are 10mm.
Case No. pole: Yangon to Bago hops aerial cables on 1111 poles, pole number is:

結果 (英文) 3:

Club
1, pole number should be designed according to the provisions of the mark. Pole number plate size (height * width) of 500mm * 250mm, overall for the white, black word, blue box (box width is 3mm), when the production of prefabricated frame on the pole plate spray white enamel, should face the railway side;
2, number: rod should be to relay segment as a unit, from cable A terminal began to B end sequencing rod in turn no.. Pole number shall be marked on the side facing the railway, a character lowest should be apart from the ground 2.5m;
3, the top for the owner G11 LOGO logo, size: 200mm*200mm;
4,
4.1: the first part of the text, the behavior of rod. Rod signal to relay segment as a unit, the A terminal as a starting point,B end to end. The starting bar number is "P0001"; the font is 4 x 8 Times New Roman, the spacing between characters is 5mm;
4.2 second behavior repeater section starting point place name abbreviation. For example: the abbreviation for "Yangon YGN"; the third act English letter "TO"; the last action repeater section end place name abbreviation, for example: BAGO of the initials "BGO"; font is 4 x 5 Times New Roman, the spacing between characters is 10mm; horizontal spacing between the
4.3 all are 10mm.
pole number examples: Yangon to Bago repeater section overhead cable 1111st poles, pole for no.: