从表1中的实验数据及计算结果可以看出，利用本论文提出的改进方法，对局部

从表1中的实验数据及计算结果可以看出，利用本论文提出的改进方法，对局部放电源进行定位是切实可行的，定位的绝对误差较小，定位精度比TDOA有一定程度的提高，都可以满足定位的要求。

結果 (英文) 1:

As can be seen from Table 1 Experimental data and calculated results, using the improved method of this thesis, for positioning the partial discharge source is practicable, the positioning of a small absolute error, positioning accuracy than tdoa have a certain degree of increase, are able to meet the requirements of the position.

結果 (英文) 2:

From table 1 in the experimental data and calculated results can be seen, by using the proposed method, the PD source location is feasible, the small absolute error of positioning, positioning accuracy than TDOA were improved to a certain extent, can meet the requirement of positioning.

結果 (英文) 3:

From the experimental data and the results in table 1 can be seen, using improved methods presented in this paper, on the partial discharge sources location is practical, positioned absolute error less than the TDOA positioning accuracy there has been some improvement, can meet the position requirements.