我公司在产品的壁厚检测时在使用超声波测厚仪完毕后还会用其他的量具如卡尺

我公司在产品的壁厚检测时在使用超声波测厚仪完毕后还会用其他的量具如卡尺和千分尺等进行验证，且超声波测厚仪在进行测试前都会校准一遍，在使用过程中超声波测厚仪的性能表现很稳定，误差在接受范围之内，测量结果与其他量具检测出来的基本一致，所以一直没有注意到超声波探头与操作手册的建议不一致。

結果 (英文) 2:

As will the use of other measuring calipers and micrometer to verify my company in the thickness testing of products has been completed using ultrasonic thickness gauge, ultrasonic thickness gauge and calibration before performing the test will be again in the course of the ultrasonic measurement Thick instrument performance is very stable, the error is within the acceptable range, the measurement results and other measuring detected basically the same, so they did not notice the ultrasonic probe is inconsistent with the operating manual recommendations.

結果 (英文) 3:

My company in the wall thickness detection in using ultrasonic thickness gauge after will use other gauges such as caliper and micrometer is verified, and ultrasonic thickness gauge before testing will be calibrated again, in the use of ultrasonic thickness gauge performance is very stable, error within the acceptable range, measurement results with other measuring consistent, so there has been no attention to inconsistencies in the ultrasonic probe and the operation manual, it is recommended.