B.6.2在任何情况下应使用至少两个空气取样器以便评估空气温度的均匀性

B.6.2在任何情况下应使用至少两个空气取样器以便评估空气温度的均匀性。
B.6.3冷水机组的每侧应使用至少一只温湿度测定盒(对于有三侧的机组，可使用两只取样器共用一个温湿度测定盒，但对第三侧将需要一个单独的温湿度测定盒)。对于空气进入机组的侧边和底部的机组，应使用附加的空气取样器，附加空气取样器的位置设置应满足上述要求。

結果 (英文) 1:

B.6.2 shall in any case using at least two air sampling to assess air temperature uniformity. B.6.3 should use at least one on each side of the chiller temperature and humidity measurement box (for three units, two samplers can be used to share a determination of temperature and humidity, but the third side will need a separate temperature and humidity determination box). For air entering the unit to the side and bottom of the unit, additional air sampler should be used, setting the position of additional air sampler should meet these requirements.

結果 (英文) 2:

B.6.2 In any case you should use at least two air samplers in order to evaluate the uniformity of the air temperature.
B.6.3 chillers on each side should be used at least one of temperature and humidity measurement kit (for three-side unit, you can use two shared a sampler kit of temperature and humidity, but the third side will require a separate temperature and humidity measurement box). For air into the sides and bottom of the units of the unit, you should use additional air samplers, the position set additional air samplers should meet the above requirements.

結果 (英文) 3:

B.6.2 should be used at least two air sampler to assess air temperature uniformity in any case.The use of at least one temperature humidity measurement box should be B.6.3 chiller (for each side of the three side of the unit, can use two samplers sharing a temperature and humidity measurement box, but the third sides will need a separate temperature and humidity test kit). The air enters the unit side and the bottom of the unit, should use the additional air sampler, additional air sampler location should meet the above requirements.