系统复位】机器无法正常运行时使用该功能。按住【停止】2秒以上即复位。注

系统复位】机器无法正常运行时使用该功能。按住【停止】2秒以上即复位。


注：系统复位后，平台上的电池和开机启动后1级品料槽的前3个电池请清走。
【1级个数】【2级个数】【。。。】【NG个数】【总数】此处分别显示：
电池合格1级个数，电池合格2级个数，【。。。】不合格个数，总数。
【电池状态】电池测试结果的指示信号：【推料位】【平台】和【小车】（下面的方框对应电池等级，其中5级位不合格品）

結果 (英文) 1:

System reset "the function cannot be used during normal operation of the machine. Press and hold the "stop" for more than 2 seconds to reset.Note: after the system reset, platforms on the battery and boot after 1 trough 3 batteries before cleaning."Number 1" and "number 2" "... "" NG number "," number "here to show:Qualified number 1 battery, battery qualified level 2 number "... "The number of unqualified, total."Battery status" battery test results indicate that "pushing" "platform" and "car" (corresponding to the box below the battery level, 5 of which level of substandard goods)

結果 (英文) 3:

The machine is unable to function properly when the machine is running. Hold down for 2 seconds or more, reset.Note: after the system is reset, the battery on the platform and the first 1 batteries of the 3 stage of the boot after the boot, please clear away.[1 number] [2 number] [... [[NG number] [total] here respectively:The number of qualified 1 battery, the number of battery qualified 2, [... Unqualified number, total.[battery state] battery test results of the signal: [push material] [platform] and [car] (below the box corresponding to the battery level, where 5 of the nonconforming product)