如图5所示，图中两圆半径均为r，A、B两点分别为传感器所在点位，C点和

如图5所示，图中两圆半径均为r，A、B两点分别为传感器所在点位，C点和D点表示放电源在两圆弧上滑动的位置。
图5：定位模拟图

結果 (英文) 1:

Shown in Figure 5, the radius of the two circles in the figure are r, a, b, two o'clock, respectively, the position of the sensor point where the bit, c point, and point d represents the discharge source is slid in the two arcs.
Figure 5: Positioning simulation Figure

結果 (英文) 2:

As shown in Figure 5, figure two radius are R, A, B two respectively for the sensor at a point, C and D point of said discharge source in two circular arc sliding position.Figure 5: positioning simulation diagram

結果 (英文) 3:

As shown in Figure 5, figure two circle radius is r,A, b two points separately and point the sensor, points c and d represents the power slide position on the two arcs.
Figure 5: positioning simulation map