新机最初运行500小时后要进行少量维护，、主要是清除系统中的杂物。 (

新机最初运行500小时后要进行少量维护，、主要是清除系统中的杂物。
(1) 清洁滤芯抽油管的节流孔。
(2) 更换油过滤器。
(3) 更换润滑油。(必须全部放尽，更换新油，而不是添油。)
(4) 吹除冷却器上的灰尘。
(5) 检查所有油管路的接头是否有松动。
(6) 检查所有电气接线、接头是否有松动

結果 (英文) 1:

New machines to maintenance after the first 500 hours of operation, and main is to clear the debris in the system. (1) clean filter pipeline orifices. (2) replace the oil filter. (3) change the oil. (Must be all out, replace with new oil, rather than oil. )(4) in addition to blowing dust on the cooler.(5) check all pipe connector is loose.(6) check all wiring, connector is loose

結果 (英文) 3:

The new machine was originally run after 500 hours to carry a small amount of maintenance, mainly in the removal of the debris in the system.(1) the oil pumping pipe orifice clean filter.(2) the replacement of oil filter.(3) the replacement of lubricating oil. (must all do, the replacement of the new oil, rather than add oil. )(4) blowing dust on the cooler.(5) the joint inspection of all pipes are loose.(6) check all electrical wiring, the joint is loose