首先对于本励磁装置重点需要的线，801 量测PT，802 仪表PT，8

首先对于本励磁装置重点需要的线，801 量测PT，802 仪表PT，803 定子电流，804 DC 电源，806 BCJ和DL两对节点，808 AC220V电源。其中801，,802，803端子排和励磁变进来的三项刀闸和灭磁开关到转子的线都要校正相序，一定要的。其他的信号，如果需要可以接，如果不接对于本装置也没有影响。

結果 (英文) 1:

First line of the key needs of the excitation device, 801 measurements PT,802 instrumentation PT,803 stator current of the 804 DC power supply, 806 BCJ and DL two pairs of nodes, 808 AC220V power source. 801,,802,803 terminal block and the excitation transformer came in three of the degaussing switch and switch to the line you want to correct the phase sequence of the rotor, make sure you. Other signals that can pick up if you want, if not for this device has no effect.

結果 (英文) 2:

First line of the excitation device for priority needs of 801 measurements PT, 802 meter PT, 803 stator current, 804 DC power supply, 806 BCJ and DL two pairs of nodes, 808 AC220V power. Of which 801, 802, 803 and excitation transformer terminal blocks come in three knife and excitation switch to the line to be corrected rotor phase sequence must be in. Other signals can be connected if needed, if not then there is no impact to the unit.

結果 (英文) 3:

First, the excitation device need to focus on the line, the 801 measuring instrument PT, 802 PT, 803 stator current, 804 DC power supply, 806 BCJ and DL two nodes, 808 AC220V power supply. One, 801, three knife switch 802803 terminals and excitation variable came in and out to the rotor of the magnetic switch line are correction phase, must. The other signal, if need be, if not then it has no effect on the device.