下面将首先对不同的放电试验结果进行计算，然后再利用时间差法来对放电源进

下面将首先对不同的放电试验结果进行计算，然后再利用时间差法来对放电源进行定位。
定位结果如下：
表1：定位算法的测量结果表

結果 (英文) 1:

The following will first be calculated for different discharge test results to locate the discharge power, and then use the time difference method.
Positioning results are as follows:
Table 1: positioning algorithm measurement results table

結果 (英文) 2:

The following will be the first for the different discharge test results were calculated, and then using the method of time difference on discharge source location.The results are as follows:

positioning table 1: positioning algorithm of measurement results table

結果 (英文) 3:

Following different discharge test results is calculated first, and then use time difference measurement for power for positioning.
Location results are as follows:
table 1 location algorithm of measurement results table