初次拟合的计算曲线与实测曲线往往会有较大的差距，此时需要反复修改有关桩

初次拟合的计算曲线与实测曲线往往会有较大的差距，此时需要反复修改有关桩土参数及拟合试算，直到两者的接近程度满意为止。修改调节参数的具体方法如下：将光标（黑色）移动到所要修改的参数项，然后直接按数字键，即可输入参数。另外几个相关的操作有，鼠标点取“上翻（参数表）”和“下翻（参数表）”两个菜单项，可实现参数表向上（下）翻页，PgUp、PgDn两键可实现同样的功能。Ins、Del两键可实现参数表黑色光标所在列整列参数按一定的百分比增加或减小。

結果 (英文) 1:

Initial fitting of curves with the test tends to have a larger gap, requiring change in pile-soil parameters and the repeated fitting trial, how close until both are satisfied. Modify the parameters of specific methods are as follows: place your cursor (black) to the parameter you want to modify, and then press a number key, to enter the parameters. Several other related operations, the mouse point "turned on (parameter table)" and "down (parameters)" two menu items, parameters can be achieved (continued) page, PgUp, PgDn two keys to achieving the same functions. Ins, Del two key parameters table black cursor column column parameters according to a certain percentage of increase or decrease.

結果 (英文) 2:

Calculate the initial curve with the measured curve fitting, there is often a large gap, then the need to repeatedly modify the pile and soil parameters and fitting spreadsheet until you are satisfied the proximity of the two so far. Modify the specific method of adjusting the parameters as follows: Move the cursor (black) to move to the item you want to modify the parameters, then press the number keys, you can enter parameters. There are several other related operations, mouse take "turn on (parameter table)," "turn down (parameter list)" and two menu items, can achieve datasheets up (down) page, PgUp, PgDn two keys achieve the same functionality. Ins, Del achieve two key parameters in Table black column of cursor parameters entire column by a certain percentage increase or decrease.

結果 (英文) 3:

There are a large gap between the first fit and the measured curve, and it is time to revise the parameters of the pile and the test data. The specific method for modifying the adjustment parameters is as follows: the cursor (black) is moved to the required parameters, and then directly by the number keys, you can enter the parameters. There are several other related operations, the click of the mouse from "over (parameter list)" and "turn (parameter list) two menu items, can realize parameter table to upper (lower) page, PgUp, PgDn two keys can achieve the same function. Ins,Del two keys can be achieved by the column parameters of the black cursor is increased or decreased by a certain percentage.