更换过滤网解决不了问题，目前我们过滤网孔3mm以下，喷嘴孔5.7mm，

更换过滤网解决不了问题，目前我们过滤网孔3mm以下，喷嘴孔5.7mm，出现这个问题的主要原因应该是碎毛器堆积大量的毛絮没有及时排出造成这个问题。1、查询碎毛刀片是否损坏。2、延长碎毛排放阀时间，最好从碎毛排放阀直接排水来解决此问题。

結果 (英文) 1:

Replace the filter can not solve the problem, we now filter hole 3mm below the nozzle hole 5.7mm, the main reason for the emergence of this problem should be broken hair is piled a lot of lint is not discharged in time cause this problem. 1, the query oddments blade damage. 2, extended drain valve oddments time, it is best to resolve the problem of broken hair from the drain valve direct drainage.

結果 (英文) 2:

Replacement of the filter can not solve the problem, at present we filter hole 3mm below, nozzle hole 5.7mm, the main reason for this problem should be the accumulation of a large number of hair scrapers did not discharge in time to cause this problem. 1, query whether the broken blade is damaged. 2, extend the time of the shredding drain valve, it is best to drain directly from the shredded discharge valve to solve this problem.

結果 (英文) 3:

The problem can not be solved by replacing the filter screen. At present, the filter screen hole is less than 3mm and the nozzle hole is 5.7mm. The main reason for this problem is that a large amount of wool accumulated in the hair crusher is not discharged in time. 1. Check whether the wool breaking blade is damaged. 2. To prolong the time of discharging valve, it is better to discharge water directly from discharging valve to solve this problem.