图B.2温湿度测定盒 B.6试验装置 B.6.1 试验装置中，空气取样

图B.2温湿度测定盒
B.6试验装置

B.6.1 试验装置中，空气取样器的位置设置应满足下列条件：
a)机组进风口的上流；

b) 空气取样器取样管的孔应对着气流方向；
c) 空气取样器应设置在距机组500 mm处，且放置在进风面换热器中心高度；

d) 空气取样器的风管应不接触地坪，以免妨碍空气的流通；
e) 机组迎风面长度方向上每隔1.5 m对应中心位置处放置一个空气取样器。

結果 (英文) 1:

Figure B.2 determination of temperature and humidity box B.6 test device B.6.1 test device, setting the position of the air sampler should meet the following conditions: A) unit into the outlet of the upper class; B) Air Sampler for sampling tube hole with air flow direction; C) air sampling unit should be set at a distance of 500 mm, and placed in the inlet Center height of surface heat exchangers; D) air duct of the sampler should not contact floor, so as not to impede the flow of air; E) unit every 1.5 m length of Windward direction corresponds to placing an air samplers at the center position.

結果 (英文) 2:

Figure B.2 temperature and humidity measurement kit
B.6 test apparatus

B.6.1 test apparatus, the position of an air sampler should meet the following conditions:
A) unit upstream inlet;

B) air samplers sampling tube with holes response airflow direction;
C) air sampler unit should be set up at a distance of 500 mm at the inlet side and placed in the center of the height of the heat exchanger;

D) air samplers duct should be no contact with the floor, so as not to impede the flow of air;
E ) placing an air sampler 1.5 m corresponding to the center position on the windward side of the longitudinal direction of every unit.

結果 (英文) 3:

Fig. B.2 temperature and humidity measuring boxB.6 test deviceB.6.1 test device, air sampler location should meet the following conditions:The air inlet of the upper unit a);B) air sampler sampling tube hole to flow direction;C air sampler) should be set up in the distance of 500 mm units, and placed the heat exchanger in the inlet side of the center height;D) air sampler air pipe should not contact the floor, so as not to impede the flow of air;E) every 1.5 m corresponding to the central position of unit length direction is placed on the windward side of an air sampler.