进行放水或排水挖除淤泥，然后将原地面开挖成台阶状，台阶宽≥1.0m，内

进行放水或排水挖除淤泥，然后将原地面开挖成台阶状，台阶宽≥1.0m，内倾3%，并回填5%灰土至原水面（标高按1.0m来控制），路基底部30cm采用5%石灰土处理，路床顶面以下0~80cm采用7%石灰土处理。

結果 (英文) 1:

Water or drainage digging out silt, and ground excavation into a step-like, step width ≥ 1.0M, internal 3% and 5% dust to backfill the original water (elevation control by 1.0M), bottom 30cm 5% of subgrade lime soil treatment, road-top 0~80cm 7% lime treatment.

結果 (英文) 2:

Drain or drain excavation carried silt, then stepped into the original excavation of the ground, step width ≥1.0m, introversion 3% and 5% of lime to backfill the original surface (elevation by 1.0m to control), the bottom of the embankment 30cm using 5 % limestone soil treatment, road bed 0 ~ 80cm below the top surface with 7% limestone soil treatment.

結果 (英文) 3:

To desilt water or drainage, then place into the excavation step, the step width is larger than 1.0m, 3% and 5% lime soil backfill inclination, to the original water (according to the elevation of 1.0m to control), 30cm is made of 5% lime soil roadbed, roadbed below the top surface of 0~80cm with 7% lime treatment.