(1)排水设计应根据道路等级、沿线地形、地质、桥涵位置等综合考虑，合理

(1)排水设计应根据道路等级、沿线地形、地质、桥涵位置等综合考虑，合理布置并有足够的排水能力，完善对出水口的处理，使各项设施衔接配合，确保排水畅通。
(2)应与农田水利建设规划相配合，防止冲毁农田或危害农田水利设施。当路基占用灌溉沟渠时，应予恢复，并采取必要的防渗措施。
(3)道路穿过村镇居民区，排水设施应与现有供水、排水设施及建设规划相协调。
(4)排水要因地制宜，经济适用，排水沟渠应选择地形、地质较好的地段通过，以节约加固工程投资。排水沟渠的出水口应尽可能引至天然河沟，以减少桥涵工程。

結果 (英文) 1:

(1) along the drainage should be designed according to the road grade, topography, geology, bridge and culvert locations considered, reasonable layout, and there is sufficient drainage capacity, improve treatment of outlet to make cohesion combined with the facilities to ensure smooth drainage.(2) should tie in with construction planning, prevention of farmland washed away or harm farm irrigation facilities. When the subgrade occupied irrigation ditches, and should be restored, and to take the necessary measures for seepage.(3) road through the villages and residential areas, drainage facilities shall coordinate with the existing water supply and drainage facilities and construction planning.(4) water to local conditions, affordable, drainage ditches should choose the terrain and geology better lot through to save reinforcement project investments. Drainage outlet as far as possible to the natural stream, to reduce the bridge project.

結果 (英文) 2:

(1) drainage design should be based on comprehensive consideration of road grade, along the topography, geology, bridge location, reasonable arrangement and have adequate drainage capacity, improve the handling of the outlet, so that the convergence with facilities to ensure smooth drainage.
(2) should be compatible with the construction of water conservancy planning to prevent harm or destroyed farmland irrigation and water conservancy facilities. When the roadbed occupied irrigation canals, should be restored, and take the necessary measures to seepage.
(3) road through the village residential area, drainage facilities should be coordinated with the existing water supply, drainage and construction planning.
(4) drain to local conditions, affordable, drainage ditches should choose the terrain, geology good lots through to save Reinforcement investment. Drainage ditch outlet should lead as far as possible to the natural rivers, bridges and culverts to reduce works.

結果 (英文) 3:

(1) the drainage design should be based on the grade of the road along the topography, geology, and the position of comprehensive consideration, rational layout and drainage capacity is enough, to improve the handling of water outlet, so that the coordination to ensure the smooth drainage facilities.(2) should be coordinated with the planning and construction of water conservancy, prevent damage or destroyed farmland irrigation and water conservancy facilities. When the roadbed occupied irrigation ditch, should be restored, and take the necessary measures of seepage.(3) the road through the villages and towns residents, drainage facilities should be coordinated with the existing water supply, drainage facilities and construction planning.(4) drainage should be adapted to local conditions, the economic application of drainage ditches should choose the terrain, better geological lot through, in order to save the strengthening of investment projects. The water outlet drainage ditches should be introduced to the natural rivers, in order to reduce the bridge project.