关于普通焊接刀排屑槽价格相对便宜实惠的焊接合金刀头的排屑能否排好这主要

关于普通焊接刀排屑槽
价格相对便宜实惠的焊接合金刀头的排屑能否排好这主要取决于槽磨的形状，当然槽并不是越宽越好，一般的数控车床粗车的较大的切削量直径10mm差不多也就是单边5mm，建议切削不要过大。当然如果你的切削量不大在5mm以下可以磨u性槽，我们叫圆槽，如果圆槽要想切削大余量的话那就得把刀尖到槽后背的宽度开的很宽，不像斜槽那样不要很快就行。

結果 (英文) 1:

For General welding flutesPrices are relatively cheap and the welding alloy cutter head can be arranged depending on slot grinding chip shape, wider slot is not possible, of course, cutting CNC lathe for rough turning of large diameter 10MM that is, unilateral 5mm, recommended cutting not too large. Of course, if you are cutting a small amount in 5mm u can mill grooves, called round notch, if the round slots to cut da Yu will have the width of the tip into the slot on the back to open very wide, not as not as chute soon.

結果 (英文) 2:

About ordinary welding tool flutes
relatively cheap affordable solder alloy tip chip can line up depending on the shape of the grinding groove, the groove is not as widely as possible, of course, the larger general CNC lathe roughing cutting the amount of 10mm diameter is almost unilateral 5mm, recommended that cutting is not too large. Of course, if you are cutting small amount at 5mm or less can wear u of the tank, we called the circular groove, if you want to cut a circular groove large margin, then it would have to tip back into the groove width is wide open, not Do chute as soon as the line.

結果 (英文) 3:

On the chip removal grooveThe price is relatively cheap and affordable welding alloy knife head chip can arrange which mainly depends on the shape of groove grinding groove, of course is not as widely as possible, cutting a large amount of 10mm CNC lathe diameter of the general is almost one-sided 5mm, proposed that the cutting is not too large. Of course, if you can not cutting the amount of grinding u slot in the following 5mm, we called the circular groove, if circular groove to cutting large amount of it will have to back the knife groove width is wide open, as soon as not for chute.