4．采样数据（曲线）存盘(F4键)。5．重新进行另一根桩采样。6．采样

4．采样数据（曲线）存盘(F4键)。
5．重新进行另一根桩采样。
6．采样全部完成后退出程序(Alt + F4组合键)。
六、曲线打印（生成报告）
打印曲线前，需要在屏幕右侧的文件列表框中，将待打印的文件名点取（点取后，文件名区域会变成蓝色），然后通过“打印管理”菜单调出打印对话框（图2.8）

結果 (英文) 1:

4. Sample data (curves) save (F4 key).5. Another sample again.6. Sampling upon full completion of exit (Alt + F4 key combination).VI curve printing (reporting)Print curve before, needed files in the list box to the right of the screen, point to the file name to be printed (after the point, the file name will turn blue), and then through the "print management" menu to bring up the print dialog box (Figure 2.8)

結果 (英文) 2:

4. Sampling data (curves) Save (F4 key).
5. Another pile re-sampling.
6. After sampling completed exit the program (Alt + F4 key combination).
VI curve print (reports)
file name before printing the curve point, you need to right of the screen file list box, will be printed to take (the last point taken, the file name field will become blue), and then through the "Print Management "menu to bring up the Print dialog box (Figure 2.8)

結果 (英文) 3:

4 sampling data (curve) disk (F4 key).
5. re sampling the other root.
6. sampling all completion of the F4 (Alt).
six, curve printing (generating report)
Print curve before you need to print the file name on the right side of the screen box, the file name will become blue, and then through the "print management" menu to call out the print dialog (Figure 2.8).